Sony DCR-PC5 - Manual (Page 10)

10
Step 1 Preparing the power supply
Charging the battery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (S series).
(1) Connect the power cord to the AC adaptor.
(2) Connect the power cord to a wall outlet.
(3) Align the hooks of the battery pack with the AC adaptor. Then fit the battery
pack in the direction of the arrow. The CHARGE lamp (orange) lights up.
Charging begins.
When the CHARGE lamp goes out, normal charge is completed. For full charge,
which allows you to use the battery longer than usual, leave the battery pack in place
for approximately one hour after the CHARGE lamp goes out.
1 2 3
CHARGE
Charging time
Battery pack Full charge (Normal charge)
NP-FS11 (supplied) 170 (110)
NP-FS21 265 (205)
NP-FS31 360 (300)
NP-F10 145 (85)
NP-F20 220 (160)
NP-F30 295 (235)
Approximate number of minutes to charge an empty battery pack