Step 1 preparing the power supply, Recording time, Playing time – Sony DCR-PC5 User Manual

Page 11

Advertising
background image

11

Getting started

Step 1 Preparing the power supply

Recording time

Recording with

Recording with

Battery pack

the viewfinder

the LCD screen

Continuous*

Typical**

Continuous*

Typical**

NP-FS11

80 (70)

40 (35)

60 (50)

30 (25)

(supplied)
NP-FS21

170 (155)

85 (75)

130 (115)

65 (55)

NP-FS31

260 (235)

130 (115)

200 (180)

100 (90)

NP-F10

60 (55)

30 (25)

50 (45)

25 (20)

NP-F20

135 (120)

65 (60)

100 (90)

50 (45)

NP-F30

195 (175)

95 (85)

150 (135)

75 (65)

Approximate number of minutes when you use a fully charged battery

Numbers in parentheses “( )” indicate the time when using a normally charged
battery.
*

Approximate continuous recording time at 77°F (25°C). The battery life will be
shorter if you use your camcorder in a cold environment.

** Approximate number of minutes when recording while you repeat recording start/

stop, zooming and turning the power on/off. The actual battery life may be shorter.

Playing time

Playing time

Playing time

Battery pack

on LCD screen

with LCD closed

NP-FS11 (supplied)

60 (55)

85 (75)

NP-FS21

135 (125)

185 (165)

NP-FS31

210 (190)

280 (250)

NP-F10

50 (45)

65 (60)

NP-F20

110 (95)

145 (130)

NP-F30

160 (145)

215 (190)

Approximate number of minutes when you use a fully charged battery

Numbers in parentheses “( )” indicate the time when using a normally charged
battery.
The battery life will be shorter if you use your camcorder in a cold environment.

Notes on the AC adaptor
•Attach the battery pack firmly.
•Charge the battery pack on a flat surface without vibration.
•Remove the supplied connecting cord (DK-115) from this unit. If not removed,

charging is not possible.

•The charging time may differ depending on the condition of the battery pack or the

temperature of the environment.

•When a fully charged battery pack is installed, the CHARGE lamp will once light,

then go out.

•If the CHARGE lamp does not light or flash, check that the battery pack is correctly

attached to the AC adaptor. If it is not attached, it will not be charged.

•Prevent metallic objects from coming into contact with the metal parts of the

connecting cord of the AC adaptor. This may cause a short-circuit, damaging the AC
adaptor.

•Keep the battery pack dry.
•When the battery pack is not to be used for a long time, charge the battery pack once

fully, and then use it until it fully discharges again. Keep the battery pack in a cool
place.

Advertising