Sony DCR-PC5 - Manual (Page 94)

94
Changing the menu settings
Icon/item
CLOCK SET
DEMO MODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
EDIT SET
Meaning
To reset the date or time (p. 95)
To make the demonstration appear
To cancel the demonstration mode
To set the clock to the local time. Press
r/R to set
a time difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the originally
set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel the melody and beep sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD
screen and viewfinder
To light up the camera recording lamp at the
front of your camcorder
To turn the camera recording lamp off so that
the subject is not aware of the recording
To make programs and perform Digital
program editing (p. 60).
To adjust and set the synchronicity of your
camcorder and a VCR for dubbing in Digital
program editing.
POWER
switch
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
VCR
VCR
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts
about 10 minutes after you have set the POWER switch to CAMERA without a
cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than
CAMERA, or set DEMO MODE to OFF.
•If you press the touch panel during the demonstration, the demonstration stops for a
while, then it starts again after about 10 minutes.
•When NIGHTSHOT is set to ON, the “NIGHTSHOT” indicator appears in the
viewfinder or on the LCD screen and you cannot select DEMO MODE in the menu
settings.
Note
If you press DISPLAY/TOUCH PANEL with “DISPLAY” set to “V-OUT/LCD” in the
menu settings, the picture from a TV or VCR will not appear on the LCD screen even
when your camcorder is connected to outputs on the TV or VCR.
In more than 5 minutes after removing the power source
The “AUDIO MIX”, “COMMANDER”, “HiFi SOUND” and “WHT BAL” items are
returned to their default settings.
The other menu items are held in memory even when the battery is removed.
Mode
z ON
OFF
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF