Self-diagnosis display – Sony DCR-PC5 User Manual

Page 135

Advertising
background image

135

Additional Information

C:21:00

Self-diagnosis display

Five-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

c Use an “InfoLITHIUM” battery pack (p. 12).

• Moisture condensation has occurred.

c Remove the cassette and leave your camcorder for at

least 1 hour to acclimatize (p. 139).

• The video heads are dirty.

c Clean the heads using the Sony DVM12CLD cleaning

cassette (not supplied) (p. 139).

• A malfunction other than the above that you can service

has occurred.

c Remove the cassette and insert it again, then operate

your camcorder.

c Disconnect the power cord of the AC adaptor or remove

the battery pack. After reconnecting the power source,
operate your camcorder.

• A malfunction that you cannot service has occurred.

c Contact your Sony dealer or local authorized Sony

service facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem even if you try corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) in the viewfinder or on the
LCD screen. If a 5-digit code is displayed, check
the following code chart. The last two digits
(indicated by ss) will differ depending on the
state of your camcorder.

C:21:ss

Viewfinder or LCD screen

Self-diagnosis display

• C:ss:ss

You can service your camcorder
yourself.

• E:ss:ss

Contact your Sony dealer.

E:61:ss
E:62:ss

C:31:ss
C:32:ss

C:04:ss

C:22:ss

Advertising