Sony DCR-PC5 - Manual (Page 109)

109
“Memory Stick” operations
Superimposing a still picture in the “Memory Stick” on a moving picture
– MEMORY MIX
Items to adjust
M. CHROM The color (blue) scheme of the area in the still picture which is to be
swapped with a moving picture
M. LUMI The color (bright) scheme of the area in the still picture which is to be
swapped with a moving picture
C. CHROM The color (blue) scheme of the area in the moving picture which is to
be swapped with a still picture
M.OVERLAP No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
To change the still picture to superimpose
Press –/+ on the right lower corner before step 6.
To change the mode setting
Press OFF before step 5, and repeat the procedure from step 2.
To cancel M. CHROM/M. LUMI/C. CHROM/M.OVERLAP
Press OFF to return to PAGE1.
During recording
You cannot change the mode setting.
The “Memory Stick” supplied with your camcorder stores 20 images
– For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
– For C. CHROM: 2 images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 119).
If you format the “Memory Stick”
Sample images will be deleted.
If a still picture to be superimposed has lots of white areas
The thumbnail image may not be displayed clearly.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
To record a still picture without any effect on a mini DV tape
Press –/+ on the left corner to increase the bars to maximum in the M. LUMI mode in
step 6.
Note on M.OVERLAP
You cannot change the still picture to superimpose in the memory overlap mode. Once
cancel the memory overlap mode to change the still picture.