Sony DCR-PC5 - Manual (Page 69)

69
Editing
Dubbing only desired scenes – Digital program editing
Erasing the program you have set
Erase OUT mark first, and then IN mark of the last program.
(1) Press UNDO. The last program mark flashes on the LCD screen.
(2) Press EXEC. The setting is cancelled.
To cancel erasing
Press CANCEL in step 2.
Erasing all programs
(1) Select VIDEO EDIT in in the menu settings.
(2) Press ERASE ALL. All the program marks flash on the LCD screen.
(3) Press EXEC. The settings are cancelled.
To cancel erasing all programs
Press CANCEL in step 3.
To finish making programs
Press
END.
The program is stored in memory until the tape is ejected.
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of the tape.
If there is a blank portion between the IN point and the OUT point on the tape
The time code may not be displayed correctly.