Sony DCR-PC5 - Manual (Page 134)

134
Troubleshooting
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize (p. 139).
• Some troubles have occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• Disconnect the Connecting plate of the AC adaptor or
remove the battery, then reconnect it in about 1 minute.
Turn the power on (p. 12, 14). If the functions still do not
work, press the RESET button using a sharp-pointed
object. (If you press the RESET button, all the settings
including the date and time return to the default.) (p. 148)
• The DISPLAY/TOUCH PANEL button is pressed.
c Press the LCD screen lightly.
c Press the DISPLAY button on your camcorder or the
Remote Commander (p. 28).
c Adjust the screen (CALIBRATION) (p. 141).
• The mirror mode is activated.
This is not a malfunction.
• Remove the battery pack and install it again.
• Something is wrong with the battery pack.
c Please cannot your Sony dealer or local authorzed Sony
service facility.
No function works though the power
is on.
The buttons do not appear on the
touch panel.
The buttons on the LCD screen do
not work.
The indicators appear mirror-
reversed in the viewfinder or on the
TV screen.
The melody or beep sounds for 5
seconds.
While charging the battery pack, the
CHARGE lamp flashes.