Sony DCR-PC5 - Manual (Page 124)

124
— Additional Information —
Using the viewfinder
You can operate with the touch panel using the viewfinder.
(1) In the CAMERA/memory camera mode, pull out the viewfinder until it clicks,
and then turn the LCD panel over and move it back to your camcorder body
with the LCD screen facing out (p. 28). The LCD screen is turned off.
(2) Press the LCD screen. EXPOSURE, OK and FADER (only in CAMERA
mode) appear.
(3) Select the desired item, then press OK.
EXPOSURE: adjust the exposure by pressing –/+.
FADER: press FADER until the desired fader mode is displayed (p. 37).
The indicator changes as follows:
FADER
t M. FADER t BOUNCE t MONOTONE t OVERLAP t
WIPE t DOT t no indicator
To make the buttons on the LCD screen disappear
Press OK.
Notes
• Do not touch the LCD screen with wet hands.
• Do not press the LCD screen with sharp objects such as pens.
• In the VCR/memory playback mode, you cannot operate with the touch panel using
the viewfinder.
To operate the items that are not displayed
Set the LCD screen and the viewfinder back to the previous position. Operate the items
using the LCD screen.
2
FADER
EXPO–
SURE OK
EXPO–
SURE OK
In CAMERA mode
In the memory camera
mode