Sony DCR-PC5 - Manual (Page 26)

26
To stop the self-timer during recording
Press START/STOP.
Use the Remote Commander for convenience.
To cancel the self-timer recording
Press SELFTIMER so that the indicator disappears from the LCD screen or the
viewfinder while your camcorder is in the standby mode.
To record still pictures on a tape using the self-timer
Press PHOTO in step 3 (p. 33).
Note
The self-timer recording mode is automatically cancelled when:
– The self-timer recording is finished.
– The POWER switch is set to OFF or VCR.
END SEARCH
You can go to the end of the recorded section after you record.
(1) In the standby mode, press FN to display PAGE1 (p. 16).
(2) Press END SCH.
The last 5 seconds of the recorded section are played back and the playback
stops. You can monitor the sound from the speaker or headphones.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
Note
If there is a blank portion in the recorded portion, the end search function may not
work correctly (p. 125).
End search function
When you use a tape without cassette memory, the end search function does not work
once you eject the cassette after you have recorded on the tape. If you use a tape with
cassette memory, the end search function works even once you eject the cassette.
Recording a picture