Sony DCR-PC5 - Manual (Page 95)

95
Customizing Your Camcorder
Resetting the date and time
The default clock setting is set to Tokyo time for the models sold in Japan, and New
York time for other models.
If you do not use your camcorder for about three months, the date and time settings
may be released (bars may appear) because the manganese-lithium battery installed in
your camcorder will have been discharged.
First, set the year, then the month, the day, the hour and then the minute.
(1) In the standby mode, press FN to display PAGE1 (p. 16).
(2) Press MENU to display the menu.
(3) Select
with r/R, and press EXEC.
(4) Select CLOCK SET with r/R, and press EXEC.
(5) Adjust the desired year, then press EXEC.
(6) Set the month, day and hour with the same procedure as step 5.
(7) Set the minute with r/R, and press EXEC by the time signal.
The year changes as follows:
To return to FN
Press EXIT.
If you do not set the date and time
“– –:– –:– –” is recorded on the data code of the tape and the “Memory Stick”.
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
SETUP MENU
CLOCK SET
DEMO MODE
3
5
SETUP MENU
CLOCK SET
DEMO MODE
1 4
SETUP MENU
CLOCK SET
DEMO MODE
7
SETUP MENU
CLOCK SET
DEMO MODE
SETUP MENU
CLOCK SET
DEMO MODE
FN
EXIT
RET. EXEC R r
EXIT
RET. EXEC R r
EXIT
RET. EXEC R r
EXIT
RET. EXEC R r
EXIT
RET. EXEC R r
EXIT
r
R
EXEC EXEC
r
R
EXEC
r
R
EXEC
2001 JAN 1
12 00 AM
2001 JUL 4
5 30 PM
JUL 4 2001
5 : 3 0 : 0 0 P M
2000 JAN 1
12 00 AM
– – : – – : – –
2001 JAN 1
12 00 AM
EXIT
1995 y 2000 T · · · · t 2079