Select “ok,” and press enter, Select the cable box output channel, Select whether or not you have a cable connection – Sony RDR-VX521 User Manual
Page 24: Press enter, Select the setting that matches your tv type
Select whether or not you use the cable
box/satellite receiver control, and press
If you want to use the cable box/satellite
receiver control (page 12), select “Yes.”
If you do not have a cable box, select “No,”
then go to step 11.
Press the number buttons to enter the
brand code of your cable box/satellite
• To re-enter the code number, select
“Cancel” and return to step 7.
Select “OK,” and press ENTER.
Select the cable box output channel.
If you connect your cable box or satellite
receiver to the recorder’s audio/video input
(page 13), select “Line1” or “Line2” and press
ENTER, then go to step 13.
If you connect the satellite receiver or cable
box to the recorder’s antenna input (page 14),
select “Ch3” or “Ch4” and press ENTER, then
go to step 13. See the instructions supplied
with your cable box to confirm the cable box’s
antenna output channel.
Select whether or not you have a cable
If you use an antenna only (no cable TV),
For all other connections, select “Cable.”
The Tuner Preset function automatically starts
searching for all of the receivable channels
and presets them.
To set the channels manually, see page 99.
After the Tuner Preset is finished, the setup
display for selecting the picture size of the
connected TV appears.
Select the setting that matches your TV
Do you want to control
your set top box with this recorder?
(Changes to the current setting will
erase all timer settings.)
Enter the brand code of
your set top box.
Select input line or
Set Top Box's output channel.
Select the way in which you will receive
Searching for receivable channels. 25
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
Select your TV screen type.