Dubbing (tape y dvd), Dubbing from a vhs tape to a dvd – Sony RDR-VX521 User Manual
Dubbing From a VHS Tape to
You can easily record (dub) a VHS tape to a disc.
Before dubbing, make the necessary audio settings
on the VCR.
◆How titles and chapters are created
The recorder takes each recording on the VHS tape
and automatically divides them into titles as they
are dubbed to a disc. These titles are then further
divided into chapters at either 5 or 15-minute
intervals, according to the “DVD Auto Chapter”
setting of “Features” in the “Setup” display.
Press DVD and insert a recordable disc.
To select the recording mode, press REC
MODE repeatedly (see page 48).
Insert a source VHS tape.
Press VIDEO to operate the VCR.
Start playing the VHS tape, and then press
STOP or X PAUSE at the point where
you want to start dubbing.
To select VCR sound, press AUDIO during
playback (see page 77).
Press T VIDEO on the recorder.
To stop dubbing
Press x STOP.
Note that it may take a few seconds for the
recorder to stop dubbing.
To play discs recorded with this recorder on
other DVD equipment
Finalize the disc (see page 91).
To dub using the on-screen menu
After step 4 above, press SYSTEM MENU.
Select “Dubbing” from the System Menu, and
Select “Simple Dubbing,” and press ENTER.
t DVD,” and press ENTER.
The display asks for confirmation.
VIDEO --> DVD
DVD --> VIDEO