Sony RDR-VX521 - Manual (Page 92)

92
1
Press DVD to operate the DVD recorder.
2
Insert a disc.
3
Press SYSTEM MENU while the recorder is
in stop mode.
The System Menu appears.
4
Select “Disc Setting,” and press ENTER.
The “Disc Setting” display appears.
5
Select “Disc Finalize,” and press ENTER.
The display asks for confirmation.
6
Select “Finalize,” and press ENTER.
The display asks for confirmation again.
7
Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
To turn off the display
Press SYSTEM MENU.
To unfinalize a DVD-RW (VR mode)
If you cannot record or edit on a DVD-RW (VR
mode) that has been finalized, unfinalize the disc
by selecting “Unfinalize” in step 6 above.
z Hints
• You can check whether the disc has been finalized or
not. If you cannot select “Finalize” in step 6 above, the
disc has already been finalized.
• To check the disc information, select “Disc
Information” in the “Disc Setting” display and press
ENTER. See page 70 for details.
Notes
• Depending on the condition of the disc, the recording,
or the DVD equipment, discs may not play even if the
discs are finalized.
• The recorder may not be able to finalize a disc if it was
recorded on another recorder.
SYSTEM
MENU
DVD
M/m/</,,
ENTER
Disc Setting 10:10 AM
Disc Name :
Disc Protect : Not Protected
Disc Format : VR Mode
Disc Finalize : Unfinalized
Disc Information
Erase All Titles
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
Do you want to finalize this disc ?
Unfinalize Finalize
Disc will be finalized.
Do you want to continue ?
Cancel OK