Sony MZ-N1 - Manual (Page 25)

25
3
Record audio data to the OpenMG
Jukebox.
For details, refer to the OpenMG Jukebox operating instructions.
The display window on the recorder will be shown as below.
4
Transfer the music file to the
recorder (Check-out).
For details, refer to the OpenMG Jukebox operating instructions.
Notes
• Only the VOLUME +/– buttons on the recorder and the VOL +/– control and the SOUND
button on the remote control can be used when the recorder is connected to your computer.
• Make sure not to touch the recorder or disconnect the AC power adaptor and the USB cable
while checking out, as this may cause the data recorded up to that point to be lost.
• While the recorder is connected to your computer, the lid will not open during editing
operations.
5
Remove the recorder from the
OpenMG Jukebox.
1 Flip the control bar towards x.
Make sure not to remove the recorder from the USB cradle until “TOC Edit”
disappears in the display.
2 While pressing down on the recorder, lean it forward to remove it.
Note
Before changing the disc, first stop the recorder and remove it from the USB cradle. If the
rechargeable battery is not inserted in the recorder at this time, the recorded or edited contents
may not be saved to the disc, or you may not be able to take the disc out. Make sure the
rechargeable battery is inserted before placing the recorder onto the USB cradle.
001
00:00
PC MD c c