Sony MZ-N1 - Manual (Page 46)

46
3
Turn the control repeatedly to adjust
the bass or the treble.
To switch “B” (bass) and “T”
(treble):
Press SOUND for 2 seconds or more.
To switch “SOUND 1” and
“SOUND 2”:
Press SOUND for a short time.
4
Press x to enter.
The sound settings are saved and the
playback display appears again.
To cancel the Digital Sound
Preset
• On the recorder
Select “SOUND OFF” in step 3.
• On the remote control
Press SOUND repeatedly until nothing
appears in the display.
z
• The settings can be stored to the Personal Disc
Memory (page 69).
• If the recorder is not operated approximately
for 5 minutes, the current setting is stored and
the display automatically switches to normal
play.
Notes
• Digital Sound Preset becomes inoperative
when the “AUDIO OUT” parameter for the
i
/LINE OUT jack is set to “LINE OUT”. In
this case, set the “AUDIO OUT” to
“HeadPhone” (page 27).
• When you use the Digital Sound Preset, the
sound may break or become distorted
depending on the settings or the track. Tn this
case, change the settings of the sound quality.
• Changing to another Digital Sound Preset
during a recording operation will not affect
the quality of recorded sound.
To change playback
speed (Speed Control)
The playback speed can be adjusted in 7
steps (80%, 85%, ...100%, 105%, 110%).
• This function can be operated on the
remote control only.
1
While the recorder is playing, press
DISPLAY for 2 seconds or more.
2
Turn the control repeatedly until
“SPEED” flashes in the display, and
then press
x to enter.
The recorder changes to speed-setting
mode.
3
Turn the control repeatedly to select
the playback speed.
“+” shows the normal speed and the
cursor shows the playback speed you
are selecting.
Example: While adjusting the bass
The cursor moves.
(Position: –2)
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).
–4 ±0 +3
DISPLAY
x
Control
Example: while the playback speed is
95% of normal.
– and the cursor appear
alternately in the display.
80% 100% 110%