Sony MZ-N1 - Manual (Page 82)

82
List of menus
Menu functions
Press the jog dial on the recorder or press DISPLAY for 2 seconds or more on the remote
control to enter a menu.
VOLUME +/– or
Digital Sound
Preset does not
function or noise
is heard. • The “AUDIO OUT” parameter is set to “LINE OUT”.
, Set the “AUDIO OUT” parameter to “HeadPhone”(page 27).
The disc cannot
edit on other
component. • The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4 stereo.
Momentary noise
is heard. • Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
The group
function (group
mode/group skip
mode) does not
operate. • While using a disc that has no group information, an attempt was
made to turn group mode on (“No Group” appears).
, Use a disc with a group information.
• When selecting program play, an attempt was made to turn group
mode on.
, Turn group mode on, before selecting program play.
The display
window is not
normal. • The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
The track that was
checked out is not
recorded on the
MD. • You removed the recorder from the USB cradle during the check
out.
, Make sure not to remove the recorder from the USB cradle
before check-out has completed and the recorder has stopped.
Menu on the
recorder
1)
Menu on the
remote
control
1)
Functions
EDIT EDIT Selecting editing operations (labeling, erasing tracks,
discs, or groups, etc.) (page 51 to 63, 65 and 66).
DISPLAY — Displaying elapsed playing time, remaining playing
time, etc. (page 38 and 47).
PLAY MODE — Selecting the play mode (repeat play, shuffle play, etc.)
(page 42).
Symptom Cause/Solution