Sony MZ-N1 - Manual (Page 44)

44
On the remote control
1
While the recorder is playing, press
PLAYMODE repeatedly until
“PGM ” flashes in the display.
2
Turn the control repeatedly to select a
track number, and then press RPT/
ENT to enter a track number.
3
Repeat step 2 to program more tracks.
4
Press RPT/ENT for 2 seconds or
more.
The program is set and the playback
starts from the first track.
z
• The program play setting will be remain in
memory even after playback finished or is
stopped.
• The settings can be stored to the Personal Disc
Memory (page 69).
• You can specify the playback mode for a
selected group when the group mode is on. To
activate the group mode, see “Selecting and
playing groups (Group Skip Mode)”
(page 41).
Notes
• All program settings are lost when the lid of
the recorder is opened.
• If the recorder is stopped and left inactive for
5 minutes in the middle of a programming
operation, the tracks selected up to that point
are entered as the program.
• If you turn group mode on or off during the
setting of a program, program setting mode
will be canceled, but the program contents up
to that point will remain.
• If you turn group mode on during program
play, the program play is canceled.
Adjusting treble or bass
(Digital Sound Preset)
You can adjust the treble and bass to suit
your taste. The recorder can store two sets
of treble-bass adjustments, which can
then be selected later during playback.
Selecting the sound quality
Factory settings of the Digital
Sound Preset
Factory settings of the Digital Sound
Preset are as follows:
• “SOUND 1”: bass +1, treble ±0
• “SOUND 2”: bass +3, treble ±0
On the recorder
1
Press the jog dial.
2
Turn the dial until “SOUND” flashes
in the display, and then press to enter.
3
Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display,
and then press to enter.
Track
number Program number
Control bar (x/X)
Jog dial
x
SOUND
Control