About the lithium battery – Sony PCV-RS411 User Manual

Page 87

Advertising
background image

About the Lithium Battery

The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in
CMOS RAM, may become inaccurate. Replace the lithium battery when this occurs.

There is danger of the battery exploding if it is replaced incorrectly. Replace the battery only with a

CR2032-type lithium battery.

Replacing the lithium battery

1.

Write down any changes you may have made to the settings in the BIOS Setup utility.

2.

Shut down your computer and turn off all peripheral devices, such as your printer.

3.

Unplug your computer and any peripheral devices.

4.

Remove the cover. See

Removing the cover

.

5.

If necessary, remove any cables, add-on cards, or other components to access the lithium battery.

6.

Gently push the battery holder's tab away from the battery and remove the battery from the holder.

7.

Install the new battery with the plus (+) side facing the battery holder tab.

Replacing a lithium battery

Replacing a lithium battery (PCV- RS410 series m odel)

Page 87

Advertising