Alliance Laundry Systems PHM1263R - Manual (Page 15)

Programming Control
13 F8208801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Table 1 (continued)
Option
Number
Option
Display
Description Default
Value
Value Range
14 “nCtd” No Cycle Time Display “oFF” “on”/“oFF”
15 “PCtd”*** Programmable Cycle Time Display 0 0 = Disabled / 1 = Enabled
16 “SdAd” Slow Drain Detection Adjust 0 0-255 seconds
17 “rtC-” Real Time Clock — —
a. “rtC1” Set Real Time Clock Minutes — 00-59
b. “rtC2” Set Real Time Clock Hours — 00-23
c. “rtC3” Set Real Time Clock Day — “001” (Sunday)-“007” (Saturday)
d. “rtC4” Set Real Time Clock Date — 1-31
e. “rtC5” Set Real Time Clock Month — 1-12
f. “rtC6” Set Real Time Clock Year — 00 (2000)-99
g. “rtC7” Daylight Saving Option “on” “on”/“oFF”
18 “dAEn” Manual Diagnostics (On/Off) “on” “on”/“oFF”
19 “FLo” Low Water Level 3 1-10
20 “FnEd” Medium Water Level 15 11-20
21 “FHI” High Water Level 27 21-30
22 “tCF” Temperature Controlled Fill “oFF” “on”/“oFF”
23 “ALd” Auto-Water Leak Detection — —
a. “ALd1” Auto-Water Leak Detection (On/Off and cycles) “oFF” “oFF”/0-127 (Cycles)
b. “ALd2” Auto-Water Leak Detection Hour 0 0-23
c. “ALd3” Auto-Water Leak Detection Day of Week “127”* “0”-“127”*
*Refer to programming section for value definition.
**Refer to the Operation Manual for default cycle setting information.
***Available on Software Version 2 or later.
Table 1