Alliance Laundry Systems PHM1263R - Manual (Page 18)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
F8208801 16
Manual Programming Flowchart (2 of 3)
PHM1487R
Figure 4
PHM1487R
(continued)
(continued) (continued) (continued)
“SUPL” - Program supply step options
“dISP” Dispenser Options:
Press START (enter) to access options
“SdUr” Supply Duration:
Press START (enter) to access options
“AdUr” - Agitate Duration (min):
“1” - “30” (for agitation types 1 or 2) or
“1” - “180” for agitation types 3 or 4
“AgSt” - Program agitate step options
“drAn” - Enable/disable drain step
“SPIn” - Program extract step options
“Cnin” - Programmable
Cycle Time Display
in Minutes: "0" - "255"
Option available on Software
Version 2 or later
“SUEn” - Supply Step Enable/Disable:
“on” = Enabled
“oFF” = Disabled
“AgEn” - Agitate Step
Enabled/Disabled:
“on” = Enabled
“oFF” = Disabled
“SSEC” - Extract Seconds:
“0” - “59”
“SPEn” - Extract Step
Enabled/Disabled:
“on” = Enabled
“oFF” = Disabled
“HEAt” - Heat in Agitate
(heat present only):
“oFF” = Disabled
“1” = To Target
“2” = Maintain
“S3” -
Supply #3:
“on” = Enabled
“oFF” = Disabled
“S2” -
Supply #2:
“on” = Enabled
“oFF” = Disabled
“S4” - Supply #4:
“on” = Enabled
“oFF” = Disabled
Drain Step:
“on” = Enabled
“oFF” = Disabled
“SEC” - Seconds:
“0” - “59”
“nIn” - Minutes:
“0” - “9”
“S1” -
Supply #1:
“on” = Enabled
“oFF” = Disabled
“SnIn” - Extract Minutes:
“30” - “3.59”: Intermediate Step
“30” - “9:59”: Final Step
“SSPd” Extract Speed (G)
(Design 1 and 2 VFD models only):
1 = Very Low Speed (60)
2 = Low Speed
(L - Speed = 100;
M - Speed = 120)
3 = Medium Speed
(L - Speed = 100;
M - Speed = 180)
“SSPd” Extract Speed (G) (Design 4 models only)
1 = Very Low Speed (27)
2 = Low Speed (100)
3 = Medium Speed (200)
(M-speed only)