Vaddio AutoTrak 2.0 - Manual (Page 23)

AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. E Page 23 of 52
Updating the System Software - AutoTrak 2.0 to AutoTrak 2.0:
1) To update the AutoTrak 2.0 system software, contact Vaddio Tech Support or
go to the Vaddio website to get the Zip File. Copy the file to Root Directory of
USB Flash Drive (not included).
2) Turn off AutoTrak 2.0 CPU.
3) Insert the USB flash drive into any available USB port of the AutoTrak 2.0
CPU.
4) Turn ON the AutoTrak 2.0 CPU. When the system recognizes a valid update
file, a dialog box will open and ask the user to confirm or cancel the firmware
update.
5) Confirm the update request and the update will be applied.
6) The system will reboot and be ready to operate.
7) Remove the USB flash drive and the update process is complete.
Note: Please do not try to upgrade an AutoTrak 1.0 to the AutoTrak 2.0 without
contacting Vaddio Tech Support. In order to upgrade from AutoTrak 1.0 to 2.0, there are
several files for the cameras and CPU that are part of the upgrade. If an AutoTrak 1.0 is
not upgraded properly, the cameras and the CPU will pretty much turn into bricks and
nobody will be happy...really. Contact Vaddio Tech Support for AutoTrak 2.0 upgrade
pricing.
The About Tab:
The About Tab
’s purpose in life is to provide information on the Software Revision, supply Technical
Support contact information and certain acknowledgements.