Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) User Manual

Page 11

Advertising
background image

Rev. 5/12

Page 11 of 15

SB

11634.10

Step 28. Remove the rear factory flares. The flares

are held in by 10mm nuts inside and on

the ends of the wheel opening.

Step 29. At the bottom front of the rear wheel well

opening measure forward 2 inches and

place a mark. Repeat for opposite side.

Step 30. Starting at the mark made in the previous

step continue following the contour up

maintaing a 2 inch distance from the

wheel well. The line shall continue to 1

inch past the door opening. Repeat for

opposite side.

REAR FLARE INSTALLTION PROCEDURES

Advertising