Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) - Manual (Page 8)

Rev. 5/12 Page 8 of 15 SB
11634.10
Note: Depending on the model and year of the
vehicle the body trim will vary. On newer
models it may be necessary to trim the
flare to fit over the body moulding.
Step 19. Hold the flare against the body using
slight pressure to check fitment. Some
trimming and sanding may be
necessary.
Step 20. Mark the area of trim to be cut by pressing
the flare against the body in the desired
position for mounting.
1984-1996 models with low profile trim.
Step 21. Using a putty knife lift the body trim off
of the body enough to cut with a razor
knife.