Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) - Manual (Page 12)

Rev. 5/12 Page 12 of 15 SB
11634.10
Step 31. Mark a vertical line 1 inch from the door
edge toward the rear of the vehicle. The
line should intersect the line in the
previous step and continue down to the
wheel opening. Repeat for opposite side.
Step 32. At the bottom of the rear portion of the
wheel well housing measure a distance
of 1 5/8 inch from the the wheel well
towards the rear of the vehicle.
Maintaining the same distance trace a
line around the wheel well up to the third
mounting hole. Draw the line straight
down intersecting the mounting hole.
Repeat for opposite side.
Step 33. Measure 3/8 inch up from the edge
of the fender well and draw a horizontal
line along the fender connecting the two
lines made in the previous steps. Repeat
for opposite side.