Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) - Manual (Page 4)

Rev. 5/12 Page 4 of 15 SB
Step 7. Following the contour of the raised area
on the fender, trace a line upwards to the
top of the third factory mounting hole.
Repeat for opposite side.
Step 8. Trace a horizontal line from the previous
line in step 7 toward the inside of the
fender well at the top of the third factory
mounting hole. Repeat for opposite side.
Step 9. Mark a line 5 1/4” from the edge of the
fender at the front door jam towards the
fender well at the bottom of the vehicle.
Repeat for opposite side.
11634.10