Rugged Ridge All Terrain Fender Flare Kit, 4-Door, 84-01 Jeep Cherokee (XJ) User Manual

Page 15

Advertising
background image

Rev. 5/12

Page 15 of 15

SB

11634.10

Step 40. The kit comes with additional self

tapping screws that if desired may be

used in the area indicated for additional

securement.

Step 41. Use of the trim tool may need to be used

on any parts of the trim that have been

misaligned during installation. To seat

the trim against the body, the curved

side will be used. To seat the trim side

against the flare the flat side will be used.

It may be necessary to start at one end

and run the tool the full length of the

flare.

For Technical Assistance Contact:

OMIX-ADA Tech Support

Phone: 1-800-449-6649

Email: [email protected]

Web: www.Omix-Ada.com

Copyright Omix-Ada 2011

Advertising