Lenovo ThinkServer TD200x - Manual (Page 56)

Server components
The following illustration shows the major components in the server.
1 Cover 14 USB cable/EasyLED diagnostics
assembly
2 Rear adapter retention bracket 15 DVD drive
3 Air baffle 16 Bezel
4 Heat sink 17 Optical drive bay EMC shield
5 Microprocessor 18 2.5-inch EMC shield
6 Heat sink retention bracket 19 2.5-inch hot-swap drive
7 DIMMs 20 2.5-inch drive cage assembly
8 System board 21 SAS/SATA 2.5-inch backplane
9 VRM 22 Fan assembly
10 Power-supply cage 23 Hot-swap fan
11 Power supply 24 ServeRAID MR10i
12 Power-supply filler 25 ServeRAID BR10i
13 Control panel assembly 26 ServeRAID MR10is
Blue on a component indicates touch points, where you can grip the component to
remove it from or install it in the server, open or close a latch, and so on.
Orange on a component or an orange label on or near a component indicates that
the component can be hot-swapped, which means that if the server and operating
system support hot-swap capability, you can remove or install the component while
the server is running. (Orange can also indicate touch points on hot-swap
components.) See the instructions for removing or installing a specific hot-swap
component for any additional procedures that you might have to perform before you
remove or install the component.
40 ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide