Installing the rear adapter retention bracket – Lenovo ThinkServer TD200x User Manual
Page 87
Advertising
![background image](/manuals/471149/87/background.png)
Installing the rear adapter retention bracket
1
Rear adapter retention bracket
2
Hinge pins
To install the rear adapter retention bracket, do the following:
1. Insert the bottom hinge point on the rear adapter retention bracket into the
matching hole in the chassis; then, insert the top hinge point into the matching
hole.
2. Install the adapters (see “Installing an adapter” on page 72).
3. Close the rear adapter retention bracket.
4. Install and lock the side cover (see “Installing the side cover” on page 99).
5. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Chapter 5. Installing optional devices and replacing customer replaceable units
71
Advertising