Lenovo ThinkServer TD200x - Manual (Page 62)

Installing the bezel
1 Bezel
2 Hinge assembly
3 Retention tabs
To install the bezel, do the following:
1. Align the hinge assemblies with the hinge holes on the chassis.
2. Push the hinges into the holes on the chassis until they snap into place.
3. If however, the bezel was removed by detaching the sliding hinge mount from
the hinge assembly (using the breakaway method as the bezel was designed to
do), complete the following steps to reattach the bezel:
a. Press in on the rear of the sliding hinge mount until it extends beyond the
edge of the bezel and hold it in place.
46 ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide