Lenovo ThinkServer TD200x - Manual (Page 57)

Opening the bezel
Important: Before you install optional hardware, make sure that the server is
working correctly. If an operating system is installed, start the server, and make
sure that the operating system starts. If no operating system is installed, start the
server and make sure that a 19990305 error code is displayed, indicating that an
operating system was not found but the server is otherwise working correctly. If the
server is not working correctly, see the Hardware Maintenance Manual for
diagnostic information.
The following illustration shows how to open the bezel.
Notes:
1. The left-side cover does not have to be removed to open the bezel.
2. The left-side cover lock must be unlocked to open or remove the bezel.
Complete the following steps to open the bezel:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 37.
2. Using the supplied key, unlock the left-side cover and bezel.
3. Press on the left edge of the bezel, and rotate the left side of the bezel away
from the server.
Opening the bezel media door
To open or remove the media door, do the following:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 37.
2. Unlock the side cover.
Note: You must unlock the side cover to open or remove the bezel. When you
lock the server side cover, it locks both the cover and the bezel.
3. Grasp the depressed area on the left side of the bezel door and rotate the bezel
to the open position.
Chapter 5. Installing optional devices and replacing customer replaceable units 41