Selecting a destination from the history – Konica Minolta bizhub 4750 User Manual

Page 16

Advertising
background image

[Scan Functions]

1-11

1.3

Specifying a destination

1

Selecting a destination from the history

In [Job History], select a destination from the history of scan transmission destinations or saved destinations.

The history shows the latest five destinations. If necessary, multiple destinations can be selected from the
history.

Tips

If a registered destination is edited or the Main Power Switch is turned off and on, history information is de-
leted.

Searching for an E-mail address from the LDAP server

When you are using the LDAP server or Active Directory of Windows Server, search for an E-mail address
through the server.

0

The server must be registered in advance. The registration procedure is explained using Web Connec-
tion. For details, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's
Guide: Applied Functions].

0

This function is available in Scan to E-mail mode.

1

Select [Addr. Book] - [LDAP], then tap [Address Search (LDAP)] or [Adv. Search (LDAP)].

2

Enter the keyword, then tap [Search].

% [Address Search (LDAP)] is performed using a single keyword.

% [Adv. Search (LDAP)] is performed using a combination of keywords for each category.

3

Select the destination from the search result.

% If you tap [Register], you can add the searched destination to the address book.

% If you tap [Details], you can view detailed information of the searched destination.

Advertising
This manual is related to the following products: