2 preparation for smb send, 1 preparation flow, Preparation for smb send -3 – Konica Minolta bizhub 4750 User Manual

Page 34: Preparation flow -3

Advertising
background image

[Scan Functions]

3-3

3.2

Preparation for SMB Send

3

3.2

Preparation for SMB Send

3.2.1

Preparation flow

Preparing a destination computer

 Checking the computer and user names

% Check the destination computer name and available user name.

 Creating a shared folder

% Create a destination folder, and start sharing.

Connecting this machine to the network

 Checking a LAN cable for connection
 Checking the network settings

% Check that an IP address is assigned to this machine.

Preparing the environment required to use the SMB Send function

 Enabling the SMB Send function

% You can use this function with the default settings unless otherwise requested.

Configuring the machine to suit your environment

 Registering a frequently used destination

% This will save you from having to enter a destination each time you send data.

 Using the WINS server

% If WINS (Windows Internet Name Service) is used to communicate with a device on the network, reg-

ister the WINS server.

 Using the direct hosting SMB service

% When using the direct hosting SMB service to communicate with a device on the network, enable

the direct hosting SMB service. (You can use this function with the default settings unless otherwise
requested.)

 Using LLMNR

% When using LLMNR (Link-local Multicast Name Resolution) to communicate with a device on the

network, enable LLMNR. (You can use this function with the default settings unless otherwise re-
quested.)

 Using DFS

% If DFS (Distributed File System) is installed in your environment, configure its setting. (You can use

this function with the default settings unless otherwise requested.)

Preparation finished

Advertising
This manual is related to the following products: