Konica Minolta bizhub 4750 - Manual (Page 19)

1.4 Scan option settings 1
[Scan Functions] 1-14
Changing the file name, E-mail subject, or body ([File Name/Subject
Name/Other])
To display: [Application] - [Basic] - [File Name/Subject Name/Other]
This function is available in Scan to E-mail mode.
Change the file name of the scanned original. In addition, you can specify the subject name and message
text of an E-mail or the sender's E-mail address (From address).
Related setting
The subject and message text of an E-mail can only be registered in Web Connection. For details, refer to
Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions].
Renaming a file ([File Name])
To display: [Application] - [Basic] - [File Name]
This function is available in Scan to Folder mode.
If necessary, you can rename a file of the scanned original (using up to 30 characters).
1.4.2 Specifying the method to scan the original
Specifying the original direction ([Original Direction])
To display: [Application] - [Original] - [Original Settings] - [Original Direction]
Specify the orientation of the loaded original.
Specifying a binding position ([Binding Position])
To display: [Application] - [Original] - [Original Settings] - [Binding Position]
When scanning a 2-sided original, select the original binding position to prevent the binding positions from
being reversed between the front and rear faces.
Settings Description
[File Name] If necessary, you can rename a file of the scanned original (using up to 30 char-
acters).
[Subject] If necessary, you can change the subject of an E-mail (using up to 64 charac-
ters).
If fixed subject phrases are registered in Web Connection, you can select a
subject from those registered.
"Message from (Device name)" is displayed by default.
[From] If necessary, change the sender E-mail address.
[Body] If necessary, you can enter the message text of an E-mail (using up to 256
characters).
If fixed message text phrases are registered in Web Connection, you can se-
lect the desired message text from those registered.
The text area is blank by default.
Settings Description
[Auto] Automatically configures the binding position of the original. When the long
side of the original is 11-11/16 inches (297 mm) or less, the binding position is
set to the long edge of the paper. When the long side of the original exceeds
11-11/16 inches (297 mm), the binding position is set to the short edge of the
paper.
[Left Bind] Select this option when the binding position is set to the left of the original.
[Top Bind] Select this option when the binding position is set to the top of the original.