Konica Minolta bizhub 4750 - Manual (Page 43)

3.2 Preparation for SMB Send 3
[Scan Functions] 3-12
3.2.3 Machine side: Operations required to use this function (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
d
Reference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chap-
ter 4 "Initial Settings of This Machine" in [Quick Start Guide].
Configuring the SMB Send environment
Enable the SMB Send function. (You can use this function with the default settings unless otherwise request-
ed.)
For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].
Tips
In Mac OS X 10.7/10.8/10.9, configure the following setting.
- Setting [Authentication] in [SMB Client Settings] to [NTLM v1/v2]
- Enabling the direct hosting SMB service
- Synchronizing the date and time, including the time zone, between the machine and your computer