3 twain scanning, Twain scanning -5 – Konica Minolta bizhub 4750 User Manual

Page 89

Advertising
background image

9.3

TWAIN scanning

9

[Scan Functions]

9-5

9.3

TWAIN scanning

Use a computer to perform scanning. The scanned image data is displayed in the window of the application
software compatible with the TWAIN driver.

1

Load the original on this machine.

After loading the original, go to the front of the computer to perform TWAIN scanning.

2

Start the TWAIN-compliant application to import scanned data.

3

Follow the application software setting to start the scanner driver.

% If a message indicating that the scanner is not available because the IP address is not specified ap-

pears, you need to specify the IP address using Network Utility. For details, refer to page 9-4.

4

If the original is loaded into the Original Glass, click [Prescan] to import the original to the preview area.

% If the original is loaded into the ADF, [Prescan] is not available. Go to Step 5.

5

Configure scan settings.

% [Basic Mode] setting items

% [Advanced Mode] setting items

Settings

Description

[Scan Objective]

Select the document type.

[Scan Type]

Specify the type of image to be scanned. Select the desired one from full color,
gray, or black and white.

[Resolution]

Select the resolution at which to scan the original.

[Auto Color Adjust-
ment]

Specify whether or not to automatically adjust the color.

[Auto Deskew]

Specify whether or not to automatically adjust the inclination of the original.

[Paper source]

Select whether or not to load the original on the original glass (flatbed) or ADF.
When using the ADF to scan the original, select 1-sided or 2-sided.

[Original Size]

Specify the size of the original.

[Rotation]

Specify the orientation of the image to be scanned.
Selecting the [Rotate back side] check box rotates the back side 180 degrees
to scan the original (this setting is available when [Paper source] is set to [ADF
(2-sided)]).

[Image size]

Displays the data size of the image to be scanned.

Clear icon

Clears the preview image.

[Before] / [After] (RGB)

If you move the cursor on the preview image, the image at the cursor position
is displayed with the tone before and after the adjustment.

[Width] / [Height]

Displays the width and height of the selected range in the preview area.

Settings

Description

[Paper source]

Select whether or not to load the original on the original glass (flatbed) or ADF.
When using the ADF to scan the original, select 1-sided or 2-sided.

[Original Size]

Specify the size of the original.

[Scan Type]

Specify the type of image to be scanned. Select the desired one from full color,
gray, or black and white.

[Resolution]

Select the resolution at which to scan the original.

[Scale]

Specify the enlargement or reduction ratio.
This setting is not supported when [Resolution] is 1200 dpi e 1200 dpi or high-
er.

Advertising
This manual is related to the following products: