Konica Minolta bizhub 4750 - Manual (Page 47)

3.4 Application functions 3
[Scan Functions] 3-16
3.4 Application functions
3.4.1 Sending data to your computer (Scan to Home)
Scan to Home
Scan to Home can easily send the original data scanned on this machine to a shared folder on a server or on
your computer.
If you log in to this machine while user authentication is employed on this machine and Active Directory is
used as an authentication server, the [Home] key appears in the [Favorites] screen.
To send scanned original data to a shared folder on the server or your computer, select the [Home] key.
Operations required to use this function (for administrators)
To use the Scan to Home function, the following settings are required.
- Registering the Home directory in Active Directory as user's registration information
- Configuring the Active Directory authentication on this machine
- Enabling the Scan to Home function of this machine
For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].
Operation flow
1
Load the original.
2
Enter user information, and log in to this machine.
3
Tap [Scan to Folder].
4
Select [Home].
5
Configure Scan option settings as necessary.
6
Press the Start key.
% Tap [Check Settings] before sending data, and check the specified destination and settings if nec-
essary.
% To redo operations for specifying destinations or option settings, press the Reset key.
% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-
inal, delete inactive jobs from the Job screen.
Sending starts.