Konica Minolta bizhub 4750 User Manual

Page 98

Advertising
background image

[Scan Functions]

10-6

10.2

Registering an address book

10

Tips

-

To check the settings for a registered destination, select its registered name, then tap [Check Settings].

-

To change the settings for a registered destination, select the registered name, then tap [Edit].

-

To delete a registered destination, select the registered name, then tap [Delete].

10.2.2

Registering information on the main screen in Scan TX mode

1

Tap [Scan to E-mail] or [Scan to Folder].

2

Tap [Address Reg.]

3

Tap [Input New Address], then tap the type of the destination you want to register.

4

Enter destination information, then tap [Register].

% The registered information is the same as that to be registered from the Utility. For details, refer to

page 10-3.

[Host Name]

Enter the host name or IP address of the destination WebDAV server (using up
to 253 bytes).

Example of host name entry: "host.example.com"

Example of IP address (IPv4) entry: "192.168.1.1"

Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

Tapping [Details] displays the full text of the host name.

[File Path]

Enter the name of the storage folder in the WebDAV server specified in [Host
Name] (using up to 96 bytes).

Entry example: "scan"

When specifying a folder in the WebDAV folder, insert a symbol, "/", between
the folder names.

Entry example: "scan/document"

Tapping [Details] displays the full text of the file path.

[User ID]

Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 63 bytes).

[Password]

Enter the password (using up to 63 bytes).

[Detail Settings]

Configure settings to establish communications with the WebDAV server.

[Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [80] is specified by default.

[Proxy]: When a proxy server is used in your environment, select [ON].
[OFF] is specified by default.

[SSL Setting]: When SSL is used in your environment, select [ON]. [OFF] is
specified by default.

Settings

Description

Advertising
This manual is related to the following products: