Konica Minolta BIZHUB 223 - Manual (Page 104)

bizhub 423/363/283/223 5-48
5.4 [Application] 5
%
Press [Application] ö [Stamp/Composition] ö [Stamp Repeat].
d
Reference
To delete a registered stamp:
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings] ö [De-
lete Registered Stamp].
Settings
[Registered Stamp] Select one from registered stamps.
[Preset Stamp] Select a stamp to be printed from the eight types available.
[Date/Time] Select the type of date and time notation. When [None] is selected for Time
Format, the time is not printed.
The date/time as of scanning the original is stamped on the paper.
[Other] [Job Number] Select Yes to print the copy job number.
[Serial Number] Select Yes to print the serial number of this ma-
chine.
For details on setting for the serial number, contact
your service representative.
[Distribution Control
Number] Prints the distribution control number.
Specify the distribution control number using a val-
ue between 1 and 99999999.
[Detail Settings] Select [Text Size], [Density], or [Pattern Overwrite].
[Position] Change the angle as required when there are no more than four lines in the
selected repeating stamp.
[Change Pos./Delete] Change the arrangement order. Select the target
Stamp Repeat and press [Up] or [Down].
To add a space to repeated stamps, press [Insert
Space]. Press either [Up] or [Down] to move o that
appears beside the specified Stamp Repeat, and
then press [Insert].
To delete the Stamp Repeat text, press [Delete],
and then press the button for the Stamp Repeat
text to be deleted.