Konica Minolta BIZHUB 223 User Manual
Page 141
bizhub 423/363/283/223
7-9
7.1
[System Settings]
7
[Finisher Adjustment]
Adjust the staple, folding, and punch position of the Finisher FS-527. Oth-
erwise, adjust where to place the paper alignment plate of the Finisher FS-
529.
This item is displayed if the Finisher FS-527 or Finisher FS-529 is in-
stalled.
d
Reference
Create a sample in advance, and then adjust them while
checking the sample.
[Center Staple Position]
[Half-Fold Position]
[Punch Horizontal Position Ad-
justment]
[Punch Regist Loop Size Adjust-
ment]
[Paper Alignment Plate Settings]
[Paper Separation Adjust-
ment]
Adjust the paper position where the two sides are separated for 2-sided
print.
[Gradation Adjustment]
Adjust irregular gradation levels of print images.
[Maximum Density Adjustment]
This function is useful when the re-
quired printing result is not obtained,
for example, the printing density is too
high or too low. Scan the amount of
toner adhered on an output test pat-
tern, and adjust to the optimal density.
For details, refer to page 7-14.
[Gradation Adjustment]
This function is useful when a print im-
age is not reproduced with consistent
density. Scan the density of an output
test pattern and adjust to the optimal
gradation. For details, refer to
page 7-15.
[Initialization]
Clear the correction values of both
[Maximum Density Adjustment] and
[Gradation Adjustment], and return
them to the factory default value (0).
For details, refer to page 7-16.
[Scanner Area]
Adjust the scan range of the scanner.
For details on displaying this item, contact your service representative.
[ADF Adjustment]
Make adjustments for scanning images in the ADF.
For details on displaying this item, contact your service representative.
[Line Detection]
[Prior Detection Setting]
Configure whether to issue an alert
when the Slit Scan Glass is dirty.
•
Select an alert display format and
contamination detection level.
[Feed Cleaning Settings]
Configure whether to remove a dirt on
the Slit Scan Glass each time one
sheet of paper passes through the
ADF when scanning an original using
the ADF.
[User Paper Settings]
Configure special paper settings for [User Paper 1] through [User Paper 4].
Settings to configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
Settings