Konica Minolta BIZHUB 223 - Manual (Page 65)

bizhub 423/363/283/223 5-9
5.1 [Basic] 5
[Binding Position] Configure the binding position of the original and copies to be output.
Without setting the [Binding Position], the resulting copy may not be what
you intended.
When [1-Sided > 1-Sided] is selected, the [Binding Position] cannot be set.
[Original Binding Po-
sition] Select the original binding position from [Left
Bind], [Right Bind], [Top] and [Auto].
•
If the binding position for the original is set to
[Auto], the position of the binding margin is
automatically selected. A page margin posi-
tion along the long side of the paper is select-
ed if the original length is 11-11/16 inches
(297 mm) or less. A page margin along the
short side of the paper is selected if the origi-
nal length exceeds 11-11/16 inches (297 mm).
• If [Auto] is selected for the original binding po-
sition, the binding margin is set at the top or
on the left.
[Output Bind Posi-
tion] Select the output binding position from [Left
Bind], [Right Bind], [Top] and [Auto].
•
If the binding position for the copy is set to
[Auto], the binding position is automatically
determined according to the orientation of the
loaded original. If the original length is 11-
11/16 inches (297 mm) or less, a binding po-
sition along the long side of the paper is se-
lected. If the original length is more than 11-
11/16 inches (297 mm), a binding position
along the short side of the paper is selected.
• If Output Binding Position is set to [Auto], the
binding position is set at the top or on the left.
[Original Direction] Select the orientation of the original loaded into the ADF or placed on the
Original Glass.
Without setting [Original Direction], the resulting copy may not be what you
intended.
[No] Disables combined copy.
[2in1] Copies images on two original pages on one sheet of paper.
Portrait original pages
Landscape original pages
Settings