Konica Minolta BIZHUB 223 - Manual (Page 242)

bizhub 423/363/283/223 12-3
12.2 Machine specifications 12
12.2 Machine specifications
bizhub 423/363/283/223
Specifications
Type Scanner, printer, desktop, or stand-alone
Document holder Stationary (mirror scanning)
Photo conductor OPC
Light source White rare-gas fluorescent
Copy system Laser electrostatic copying
Developing system Dry 2-component HMT developing system
Fusing system Roller fusing system
Resolution Scanning 600 dpi e 600 dpi
Output 1800 dpi equivalent e 600 dpi
Originals Type Sheets, books (two-page spread), three-dimensional
objects
Size Max. 11 e 17 (A3)
Weight 4-7/16 lb (2 kg) Three-dimensional objects
Copying paper type Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m 2 to 90 g/m 2 )), Thick 1 * (24-
3/16 lb to 39-7/8 lb (91 g/m 2 to 150 g/m 2 )), Thick 2 * (40-3/16 lb to 55-7/8
lb (151 g/m 2 to 210 g/m 2 )), Letterhead, Colored paper, Transparency * ,
Postcard * , Envelope * , Label sheet *
2-Sided: Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m 2 to 90 g/m 2 ))
* Available for Bypass Tray.
Copy paper size <Tray 1>
11 e 17 w to 8-1/2 e 11 w/v, 5-1/2 e 8-1/2 w, A3 w to A5 w, 8 e 13 w
*1
,
16K v, 8K w
<Tray 2>
11 e 17 w to 8-1/2 e 11 w/v, 5-1/2 e 8-1/2 w, A3 w to A5 w, 8 e 13 w
*1
,
16K v, 8K w
<Bypass Tray>
11 e 17 w to 5-1/2 e 8-1/2 w/v, A3 w to B6 w, A6 w, 4 e 6 w, 8 e 13 w
*1
,
A6 card w, 16K w/v, 8K w
Width: 3-9/16 to 11-11/16 inches (90 mm to 297 mm), Length: 5-1/2 to 17
inches (139.7 mm to 431.8 mm)
*1
There are six types of foolscap: 8-1/2 e 13-1/2 w, 220 mm e 330 mm w,
8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, and 8 e 13 w. Any one of
these sizes is selectable. For details, contact your service representative.
Number of sheets loaded in
Output Tray
Plain paper 250 sheets
Thick 10 sheets
Transparency 1 sheet
Paper tray capacity
(8-1/2 e 11(A4)) Tray 1/Tray 2 Plain paper: 500 sheets
Bypass Tray Plain paper: 150 sheets, Thick 1/2: 20 sheets, Trans-
parency/Postcard/Label sheet: 20 sheets, Envelope:
10 sheets
Warm-up time Period from the time the Main Power Switch was turned on to the time
Sub Power Switch was turned on to get ready for printing (room temper-
ature: 73.4 °F (23 °C))
12 sec. or less
Period from the time Main Power Switch was turned on to the time this
machine is ready for printing (room temperature: 73.4 °F (23 °C))
30 sec. or less
When a Hard Disk is not installed:
25 sec. or less
Warm-up time may vary depending on the operating environment and us-
age.