Konica Minolta BIZHUB 223 - Manual (Page 87)

bizhub 423/363/283/223 5-31
5.4 [Application] 5
2
Configure respective functions.
% Press [Sample Copy] to see how it will appear with the currently specified quality adjustment set-
tings.
5.4.3 [Book Copy/Repeat]
[Book Copy]
Divides or does not divide page spreads (such as a book or catalog) into left and right pages to copy data.
This function enables copying with the ADF open by placing the original on the Original Glass. If necessary,
you can place an original image at the center of the paper to copy.
0 Place the original on the Original Glass.
0 If [Book Copy] is selected, [Image Adjust] is set to [Centering] and [Erase] is set to [Non-Image Area
Erase] automatically. For details on [Centering], refer to page 5-36. For details on [Non-Image Area
Erase], refer to page 5-38. The automatically set [Centering] or [Non-Image Area Erase] can be can-
celled.
0 When [Book Spread] or [Separation] is selected, pressing the Start key starts printing.
0 When [Front and Back Cover] is selected, the scanning operation starts with the front cover followed
by scanning of the back cover, and ends with scanning of all two-page spreads of the body text in the
order of the page numbers.
0 When [Front Cover] is selected, all two-page spreads are scanned in order after the front cover.
0 When [Front and Back Cover] or [Front Cover] is selected, wait until all pages in the original are scanned
and then press [Finish] and then the Start key to start printing.
[Sharpness] Adjust the sharpness to emphasize the edges of text so that copied
text can be read more easily. You can make an overly sharp original
image softer or a blurry image clearer.
Settings
SURVEYOR’S
REPORT
SURVEYOR’S
REPORT