Konica Minolta BIZHUB 223 - Manual (Page 83)

bizhub 423/363/283/223 5-27
5.4 [Application] 5
1
Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Program Jobs].
2
Select the desired copy settings, and then press the Start key.
3
Press [Fix].
% Press [Retry] to delete the scanned job. Press [Change Setting] to configure the copy settings.
% When the original has been loaded on the original glass, press [Finish].
4
Load the next original and press [Change Setting].
5
Select the desired copy settings, and then press the Start key.
% Repeat Steps 3 to 5 until all originals have been scanned.
6
After all original pages have been scanned, press [Finish].