Konica Minolta BIZHUB 223 User Manual
Page 124
bizhub 423/363/283/223
6-9
6.3
[Copier Settings]
6
[Half-Fold Specification]
Specify whether to apply Half-Fold together for all pages or for each page
when handling a job containing multiple pages.
When Half-Hold is selected with Booklet, all pages are half-held together
even if [One Sheet at a Time] is selected.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
If the number of folded sheets exceeds three while [Multiple Sheets] is se-
lected, a warning message is displayed prompting the user to cancel the
setting.
When this item is specified from the printer driver, [Half-Fold] is released
automatically for printing if the number of folded sheets exceeds three.
[Print Jobs During Copy
Operation]
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-37.
[Automatic Image Rotation]
[Finishing Program]
Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is available if the Finisher FS-527 or Finisher FS-529 is installed.
[Card Shot Settings]
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-37.
Factory default
[Auto Booklet ON when
Fold & Staple]
[Auto Select Booklet]
[Auto Zoom for Com-
bine/Booklet]
[Auto Display Zoom Ratio]
[Auto Sort/Group Selec-
tion]
[Yes]
[Default Copy Settings]
[Factory Default]
[When AMS Direction is In-
correct]
[Print]
[Separate Scan Output
Method]
[Page Print]
[Enlargement Rotation]
[Allow]
[Auto Zoom (Platen)]
[OFF]
[Auto Zoom (ADF)]
[ON]
[Specify Default Tray when
APS Off]
[Tray Before APS ON]
[Select Tray for Insert
Sheet]
[Tray 2]
[Half-Fold Specification]
[Multiple Sheets]
[Print Jobs During Copy
Operation]
[Accept]
[Automatic Image Rotation]
[When Auto Paper/Auto Zoom is set]
[Finishing Program]
[ON]
[Card Shot Settings]
- [Layout]: [Top/Bottom]
- [Zoom]: [Full Size]
Settings