Konica Minolta BIZHUB 223 - Manual (Page 222)

bizhub 423/363/283/223 10-16
10.1 Using an authentication unit (biometric type) 10
15
Turn the Main Power Switch of this machine off, connect the authentication unit to this machine, and
turn the Main Power Switch of this machine on.
NOTICE
To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on
after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
10.1.3 Logging in to this machine
This section explains how to log in to this machine with the finger vein pattern authentication.
- To use authentication unit (biometric type), register the finger vein pattern in advance.
- If authentication fails frequently, finger vein patterns may not be registered correctly. Register finger
vein patterns again.
- Authentication is carried out when you simply place your finger on the [1-to-many authentication]. Au-
thentication is carried out when you enter the user name and place your finger on the [1-to-1 authenti-
cation].
- Press [ID & PW] to [Login] by entering the [User Name] and the [Password], without using the authenti-
cation unit.
When [1-to-many authentication] has been specified
%
Place your finger on the authentication unit.
The basic settings screen appears.