Konica Minolta BIZHUB 223 - Manual (Page 123)

bizhub 423/363/283/223 6-8
6.3 [Copier Settings] 6
6.3 [Copier Settings]
Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö[User Settings] ö [Copier Settings].
Settings
[Auto Booklet ON when
Fold & Staple] Configure whether to automatically specify Booklet when Center Staple
and Fold is selected.
This item is displayed if the Saddle Stitcher SD-509 is installed in the Fin-
isher FS-527.
[Auto Zoom for Com-
bine/Booklet] Configure whether the preset zoom ratios are automatically selected when
Combine or Booklet is selected in Auto Paper mode.
•
Select the recommended zoom ratios for the following zoom settings:
2 in 1, Booklet: 70.7%
4 in 1: 50.0%
8 in 1: 35.3%
[Auto Sort/Group Selec-
tion] Configure whether to output the copied pages automatically in Sort mode
when copying multiple-page original using the ADF.
[Default Copy Settings] Configure the initial values for the Copy function to be displayed when the
power in turned on or the Reset key is pressed.
[Current Setting] The current settings are used as the default set-
tings.
[Factory Default] The factory settings are used as the default set-
tings.
[Default Enlarge Display
Settings] This setting is for the enlarged display screen operations. For details, refer
to the [User's Guide Enlarge Display Operations].
[When AMS Direction is In-
correct] Configure whether to print or discard the job when the original orientation
does not match that of paper in Auto Zoom mode.
[Separate Scan Output
Method] Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the Original Glass.
[Page Print] Printing of copies that can be printed begins while
the original is being scanned.
[Batch Print] Printing begins after all pages of the original have
been scanned.
[Enlargement Rotation] Configure whether to rotate and print a large-size original image when the
original orientation does not match that of paper.
[Auto Zoom (Platen)] Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-37.
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Select Tray for Insert
Sheet]