1 [system settings, 1 [power save settings, System settings] -3 – Konica Minolta BIZHUB 223 User Manual

Page 135: Power save settings] -3

Advertising
background image

bizhub 423/363/283/223

7-3

7.1

[System Settings]

7

7.1

[System Settings]

Configure the basic functions of this machine.

7.1.1

[Power Save Settings]

Configure the settings for the power-saving mode.

%

Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Power Save Set-
tings].

Settings

[Low Power Mode Set-
tings]

Enter a time period before switching to the lower power mode when this
machine is not being operated.

[Sleep Mode Settings]

Enter a time period before switching to the sleep mode when this machine
is not being operated.

[Power Save Key]

Configure the type of the power save function to be started when you press
the Power Save key.

[Low Power]

Provides power-saving effect higher than normal.

[Sleep]

Provides power-saving effect higher than the low
power mode. However, the machine must be
warm-up when restarting operations, therefore
taking more preparation time than the low power
mode.

[Enter Power Save Mode]

Configure settings for switching to the power save mode after printing doc-
uments from computers or receiving faxes.

[Normal]

Enters the power save mode when the time spec-
ified in Low Power Mode Settings has elapsed.

[Immediately]

Enters the power save mode in a short time.

[Fax Board Power Save]

Specify whether to enable power save mode. For details, refer to the [Us-
er's Guide Network Scan/Fax/Network Fax Operations].

Factory default

[Low Power Mode Set-
tings]

15 min.

[Sleep Mode Settings]

20 min.

[Power Save Key]

[Low Power]

[Enter Power Save Mode]

[Immediately]

[Fax Board Power Save]

[Yes]

Advertising
This manual is related to the following products: