Konica Minolta BIZHUB 223 - Manual (Page 138)

bizhub 423/363/283/223 7-6
7.1 [System Settings] 7
7.1.5 [Weekly Timer Settings]
Configure the weekly timer in order to allow you to turn on and off this machine at the specified date and time.
0 An exact date/time setting must be performed in advance.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Set-
tings].
Settings
Specify whether to apply daylight saving time in the time display on this machine. If [Yes] is selected, this
item displays the time that is ahead of the current time by the specified number of minutes. Specify a
length of time between 1 and 150 minutes on a 1-minute basis to apply daylight saving time.
Factory default
[Daylight Saving Time] [No]
Settings
[Weekly Timer ON/OFF
Settings] Configure whether to use the weekly timer function.
[Time Settings] Configure the time of each day of the week to turn on and off this machine.
[Set All] The setting for the selected day of the week is ap-
plied to the same day of the week in other weeks.
[Delete] Cancels the selected input value.
[Date Settings] Configure the days when timer operation is activated individually. To can-
cel the setting, press the same day again.
[Daily Setting] Configure the days of the week when the timer
operation is activated.
[Select Time for Power
Save] Configure the time to turn this machine off and on if you want to turn it off
at a specific time, for example, during a lunch break.
[Password for Non-Busi-
ness Hours] Configure whether to require a user to enter the password if the user uses
this machine outside the specified time.
•
To make the user to enter the password, you need to specify the pass-
word.
Factory default
[Weekly Timer ON/OFF
Settings] [OFF]
[Select Time for Power
Save] [No]
[Password for Non-Busi-
ness Hours] [No]