Konica Minolta BIZHUB 223 - Manual (Page 153)

bizhub 423/363/283/223 7-21
7.1 [System Settings] 7
7.1.14 [Skip Job Operation Settings]
Configure whether to start processing for the next job when the current job stops due to running out of paper
in the paper tray. Selecting [Yes] provides no print queue time due to job stopping.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Skip Job Operation
Settings].
7.1.15 [Default Bypass Paper Type Setting]
Configure the initial settings for the paper type to be used for the bypass tray. The initial setting for the paper
type is applied after the job finishes or the tray runs out of paper.
%
Press Utility/Counterö[Administrator Settings]ö[System Settings]ö[Default Bypass Paper Type Set-
ting].
Settings
[Fax] Configure whether to skip a job in the fax mode.
[Other than Fax] Configure whether to skip a job in a mode other than the fax mode.
Factory default
[Skip Job Operation Set-
tings] [Fax]: [Yes]
[Other than Fax]: [Yes]
Settings
Configure whether to specify the initial setting for paper type for the bypass tray. When you specified this,
select a paper type.