10 [security settings, 1 [administrator password, 2 [user box administrator setting – Konica Minolta BIZHUB 223 User Manual

Page 175: Security settings] -43, Administrator password] -43, User box administrator setting] -43

Advertising
background image

bizhub 423/363/283/223

7-43

7.10

[Security Settings]

7

7.10

[Security Settings]

Configure the settings for the restricting the functions of this machine for processing secret data.

7.10.1

[Administrator Password]

Change the administrator password.

0

The administrator password can be entered using 0 through 8 digits.

0

If password rules are specified, an 8-digit password must be entered.

0

If you enter an incorrect administrator password a configured number of times, you are prohibited from
using this machine. In this case, contact your service representative.

1

Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Administrator Pass-
word].

2

Enter the administrator password, and then press [OK].

3

Enter a new administrator password.

4

Press [Password Confirmation], and enter the administrator password again.

5

Press [OK].

The password is changed.

d

Reference

To configure password rule settings:

Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Pass-
word Rules].

7.10.2

[User Box Administrator Setting]

Configure settings for the User Box operations. For details, refer to the [User's Guide Box Operations].

Reference

-

This function is available only when a Hard Disk is installed.

Factory default

[Administrator Password]

12345678

Advertising
This manual is related to the following products: